SIM001 › Beyond the cockpit › The flight computer
Commanding the plane from the ground station › The line is narrow passed
As a pilot with a TX15, I want the ground station to command the plane through the TX15, so that it needs no radio of its own.
The test behind the tutorial The line is narrow: every step it takes, what it checks and what it saw.
Start
From the setup of The flight computer, and:
Given the ground station telemetry is flowing
Everything it starts with
Given the TX15 is connected And the TX15 roll stick is 0 % And the TX15 pitch stick is 0 % And the TX15 throttle stick is 0 % And the TX15 arm switch is off And the corrupted frames are 0 % And the TX15 screen battery is 12 V And the TX15 screen bank is 0 degrees And the TX15 screen airspeed is 0 m/s And the TX15 screen climb is 0 m/s And the TX15 screen satellites is 12 And the TX15 screen message is none And the ground station telemetry is flowing And the ground station map distance is 0 m And the TX15 screen mode is MANUAL And the TX15 screen arming is disarmed
- Every arranged state read back as arranged (16)
1 When 10 seconds pass
When 10 seconds pass Then the ground station telemetry rate is at most 4000 bytes per second
Expected behaviour: The telemetry does not use more than the line carries.
- the ground station telemetry rate is at most 4000 bytes per second · The telemetry does not use more than the line carries