SIM001

SIM001 › Beyond the cockpit › Watching a real plane

Test report

Watching a flight from the pilot box › The plane takes off, turns and goes quiet passed

As a pilot with a real plane, I want to see the flight in the 3D view of the simulator, so that I can replay what the plane did, and record pictures for a camera system.

The test behind the tutorial Watching a flight from the pilot box: every step it takes, what it checks and what it saw.

Start

From the setup of Watching a real plane.

Everything it starts with
Given the telemetry is silent
  And the reported distance north of home is 0 m
  And the reported height is 0 m
  And the reported bank is 0 degrees
  And the reported heading is north
  And the plane in the view is missing
No screenshot of this step.
No screenshot of this step.
  • Every arranged state read back as arranged (6)

1 When 1 second passes

When 1 second passes
Then the plane in the view is missing

Expected behaviour: No telemetry, no plane.

No screenshot of this step.
No screenshot of this step.

2 When the telemetry is flowing and the reported distance north of home is 120 m and the reported height is 40 m and 1 second passes

When the telemetry is flowing
  And the reported distance north of home is 120 m
  And the reported height is 40 m
  And 1 second passes
Then the plane in the view is shown
  And the height above the pilot box in the view is 40 m
  And the distance north of the pilot box in the view is 120 m

Expected behaviour: The plane is where it says it is.

No screenshot of this step.
No screenshot of this step.

3 When the reported bank is 30 degrees and the reported heading is east and 1 second passes

When the reported bank is 30 degrees
  And the reported heading is east
  And 1 second passes
Then the right wing in the view is low
  And the heading in the view is east

Expected behaviour: The plane is where it says it is, The plane banks as it banks, The plane points where it flies.

No screenshot of this step.
No screenshot of this step.

4 When the telemetry is silent and 10 seconds pass

When the telemetry is silent
  And 10 seconds pass
Then the plane in the view is shown

Expected behaviour: A quiet plane stays where it was last heard.

No screenshot of this step.
No screenshot of this step.